Throttle
Position Switch (TPS)
(May be used with our Multi-Stage
Boost Control to limit part-throttle boost)
Applications: All vehicles using a 0-5 volt throttle position
sensor signal (the TPS will work with either a rising or falling
voltage signal)
Price: $55
Purpose: To
trigger any 12v device at the given throttle position.
This fully electronic switch is
designed to by used with our Multi-Stage Boost Control and will
allow for fully automatic switching between low and high boost
modes, depending upon throttle position. The result is
manageable power with economy under normal driving with full power
available at a tip of the throttle. The TPS requires only a
0-5V signal from your throttle position sensor (or 5-0V signal).
It can be set to control an accessory at any throttle position,
such as:
Nitrous
Two
Stage Boost Controller
Water Injection
Intercooler Sprayer
Whatever you Need!
A
tuning light is built in, so you won't need a voltmeter, and
calibration takes only a few minutes. Using this device with
our MSBC and one of our manual boost controllers will allow for
fuel savings by limiting boost under light throttle conditions.
In most cases, the low boost setting can be set even lower than
the OEM setting, for enhanced economy.
Email us your questions at
ThreeBarRacing@yahoo.com
Just
$6 for
US Shipping
$10 Anywhere else, regardless of order size!
TPS
